Custom Stainless Steel Drop In (Top Mount) Sinks

Exclusively handcrafted of 316L Marine/Medical grade 16 gauge Stainless Steel. Do you need a replacement for a sink that has been discontinued? Looking for a 48" X 22"drop in sink that is a single or double bowl? Want an upgrade from a triple bowl or double bowl outdated design to a single bowl workstation sink of today? We do this every day. Give me a call. I would love to tell you how simple this is to accomplish. Wait... Before you say "NO WAY am I going to have a Top Mount Sink!" Think about why you say that... Most commonly people feel they are ugly - well take a look... this is not an ugly sink. Secondly, most people say it is difficult to wipe from the counter into the sink. That will not happen with my workstation sink design. Everything is done on the sink. There is never a need to wipe into the sink. I have had customers select a top mount sink in new construction for two reasons. 1. They like more of the stainless showing. 2. There is no way to chip the edge of the granite around the sink. If you have an under mount sink, check the edge around your sink. I bet there might be chips!

Top mount stainless replacement retrofit sink
Most often, these sinks are purchased to replace existing sinks. All are custom made for your particular situation. Frequently, we are asked to replace double or triple bowl sinks like the one below. Most of our customers like our "architectural edge profile" as shown to the left. (That one had custom clipped corners) We can also give you a flat flange. Remember, these are hand made sinks, not mass produced sinks. All of our stainless sinks are "zero radius" sinks. The only radius is a slight one from the bottom of the bowl to the sides. A question often heard is "does this make the sink difficult to clean?" The answer is no. We have sold thousands of sinks with zero radius corners and everyone loves them. Most of the "high end luxury" sinks are made with a zero radius. This feature gives you much more usable room inside the sink, plus a more custom look when installed. See Pricing
Drop in replacement stainless steel sink
The photos to the left are examples of how we can replace virtually any under mount sink with a Signature Series or NexGen drop-in top mount sink (stainless or copper).

Top mount you say? How do you wipe crumbs into the sink you ask? Well, with this design, all of the food preparation is done on the sink. No need to ever wipe anything into the sink! Watch this video of a new sink owner to see some of the benefits of my NexGen proprietary design.



We can likely help you find a great local granite fabricator to do the work for you. This should be an easy one-day project. I will personally walk you through the entire process to insure your project goes smoothly.
The sink, below left, replaced a double bowl sink and was shipped to their home in Canada. The second sink replaced an outdated, poorly designed,and discontinued Kohler Pro-Cookcenter K-3309. I wonder why it was discontinued? LOL.
Drop in replacement stainless sink NexGen workstation sink
replace discontinued sink Looking for parts for your Kohler Pro Center K-3309? How about replacing the ridiculous design with something that is actually functional?
replace a discontinued kitchen sink Simple stainless retrofit sink that replaced a double bowl sink.
replacement for discontinued kitchen sinks by Moen, Kohler, Elkay, Eljer and more. Hand Finished 316L Marine Grade Stainless NexGen workstation sink.

BEFORE (Rich's)

AFTER (Rich's)

BEFORE Dianna

AFTER Dianna

Rich went from the most difficult sink in the industry to use, to the easiest. Way to go Rich! Rich's kind note:

"Dino, We absolutely love the sink. It is everything you promised and more. It is such a great cook's sink. The hammered look was worth every cent. Rich"
The sink below left, is the same sink that was installed in the below right photo.

custom hammered stainless steel workstation top mount replacement sink
replacement stainless steel kitchen sink This sink replaced a Corian double bowl sink.

 

stainless drop in replacement sink with integral backsplash NexGen 316L Marine Grade hand finished stainless drop in sink with rear deck and integral backsplash. Waterstone chrome 9750 faucet and soap dispenser.
We replace sinks all the time. If you have an undermount triple or double bowl sink, we can easily replace it with a self rimming top mount sink. This one happens to be a hand-finished 316L Marine Grade stainless sink with our NexGen workstation option. These are getting very popular. All that had to be done was for the homeowner to have the sink cut out and the sink dropped in place. The project in the video below was completed in about 4 hours. Thank you, Danielle, for allowing us to video tape your comments.

"Dino, The sink and faucet are finally installed and boy what a difference. I have attached a couple pictures of the installed sink as well as one of the old sink. Both the plumber and the granite guy said they liked it a lot especially the texture of it. The plumber said he wished he could afford one like it (hard to believe a plumber couldn't afford one with what they charge). It arrived near my birthday and we got it installed just before our wedding anniversary so it has been a very gifting year. Thank you so much for making my birthday and anniversary this year the greatest. My sink is the best and I am super happy with it." Dianna

 I asked Dianna to tell me how long the project took and how much the labor cost was.

"The time frame to replace the sink was approximately 6 hours (1 hr for the plumber to disconnect, 3 hours for the granite guy to remove the sink and change the granite opening to fit the new sink-put the hole for the faucet and 2 hours for the plumber to reconnect the sink and faucet including installation of the garbage disposal) however it had to be done over a 3 day period because of scheduling (had I known the time involved it might have been done in one day). The plumber charged $335 plus the cost of the new garbage disposal (which I am very happy I did as it appears the old one really had some problems in comparison to this new one) and the granite guy charged $90/hr for a total of $270. Even the granite guy asked about your website for some of his customers. I figure that including the cost of the new disposal I saved between $2000 and $4000 by having you make the sink and getting the great faucet from you over getting a "Chinese" sink & faucet and replacing the granite as would have been required. My husband is beginning to see the advantage of the texture so it is growing on him (he does not like change although he loves the size and quality of the sink and faucet). I am so glad I found your website and spoke with you about the sink - glad you talked me out of a multiple bowl - glad I purchased the terrific faucet from you - my kitchen is so much prettier and I love the sink and faucet more than even I imagined I would. Thank you and your staff for a great purchase. I have several friends who will be green with envy, so of course I will pass on to them your website.